| |
By PR3ACH3R
June-28-2003
NOTE:
THIS SITE DOES NOT MEAN TO ENCOURAGE
THE PURCHASE OF THE DISCUSSED PRODUCTS !
(not until the manufacturer finds the time & will to
address
all these products issues anyway....)
IT EXISTS FOR THE SOLE PURPOSE OF HELPING
THE USERS WHO PURCHASED THESE PRODUCTS,
SOLVE PROBLEMS & GET FIXES/UPDATES
THE MANUFACTURER HAS YET TO FIX & PROVIDE.
USE AT YOUR OWN RISK !
NEITHER THIS WEB HOST NOR I OR ANYONE ELSE WILL BE RESPONSIBLE FOR
ANY DAMAGE YOU MAY INFLICT ON YOUR SYSTEM BY USING THESE FILES,OR ANY INFO IN THIS SITE.
(The Author is Not Affiliated with GigaByte or ITE)
NOTE : THE INFO ON THIS PAGE IS RATHER OLD
NOW,
& PARTIALLY THANKS TO THIS VERY PAGE IS WIDELY KNOWN.
THE PROBLEM STILL REMAINS & WAS NEVER FIXED BY THE MANUFACTURER,
& JUST ABOUT EVERYONE HAVE GIVEN UP HOPE THAT IT WILL EVER BE
FIXED.
This is a Temporary page,
For temporary Solutions ,
For Hopefully Temporary Problems..
For a few Gigabyte AMD Nforce2 Motherboards.
I Came across a "BUG" in GA-7N400 Pro/7NNXP
It Concerns the ITE Raid Chip ,
On Paper the iTE looked promising,But ..
When Used With Any Pro Audio Card ,For recording ,
The ITE CHIP will send Horrible Repeating Clicks every second or
so while WRITING TO THE DRIVE ..
This Phenomena Repeats itself every second or so WHILE THE DRIVE IS WRITING.
The Clicks DO NOT APPEAR when used with the
STANDARD IDE Channels of the Nforce2 .
The Phenomena is Not a new one.
I have Seen it Before on Other Controllers That are programmed
Or implemented in Such a Way that they Simply Hog The PCI Bus,
Leaving very little breathing room left for other devices..
This was the ONE board That COULD HAVE MADE it
To Being a Great Workstation Nforce2 based MB,
As All others don't have PATA raid .
TO PRO AUDIO GUYS / MUSICIANS:
(pro Video cards should be tested as its very likely a problem
with video as well)
If you own a Pro Audio card (Motu ,Rme ,Aardvark ,or any other Pro
Card With ASIO Support)
HERES HOW TO TEST:
You Will Need To Record at least 2 Tracks-(A Dual mono Or STEREO
Track is OK) & ONLY in WAV Format.
PREFERABLY 24Bit WAV Or Even 32 Bit WAV Files ,if you have ANY
PRO(ish) Audio Software. If you don't Just Dl a Demo of one.
If You Only Own An Audigy/Audigy2
you Can Try ,& Might even get very little or no clicks, Because Im
Not sure Your Audigy can Saturate The PCI Bus Like a Pro Card.
Also Make Sure The Software uses The path to a Drive on the iTE
For all its storage options ,Both Audio & Temp Files.
I know The Audigy Has ASIO Drivers (Lower Latency & higher
Performing Drivers Pioneered By a Company Called Steinberg-Steinberg.Net)
So you'll need to try it with Something like Steinbergs Cubase SX
Software ,& The ASIO Drivers in a Latency of about 5-10
Milliseconds,in order To get Some Action going on the PCI Bus.
Without a Big Enough Hit on The PCI Bus ,your mileage may vary.
As Gigabyte & ITE Both failed to provide a solution
I Decided to supply a Temporary Solution for people who need it.
The Temporary Solution:
The links
in thsi site have the latest bios
For the GA-7N400 Pro & 7NNXP MODIFIED TO INCLUDE The Latest RAID & CDROM SUPPORT ON THE ITE CHIP,as well as the latest SATA,Plus
other enchacements.
By Moving your DVD,CDROM,& Burner to the iTE controller, you can have the secondary ide connector free for
using two HDDS (Secondary IDE connector of the NVIDIA IDE
PORTS...) For ClickLess Recording, without the PCI bus Straining
& Fighting to keep up with both your Audio/Video Card
bandwidth & the iTE chip.
.
 |